Regarding your home solar energy project, installing the solar panels may be a bit intimidating step. However, it appears more difficult than it really is. So that you can set up Home Solar Panel Systems the correct way, you should take note of the following 4 steps to make sure you get maximum performance from your solar power panels. Continue reading to understand the way to set up solar panels properly.
Choosing the Mounting Location
The primary and most essential action you must do to install solar panels is to select the right location to mount your devices. For many homes, space can be limited. Therefore, it’s ideal to place them on the roof. If you own a lot of terrain, you may want to think about a pole mount installation, as it can be more effective and often simpler.Independent of which mounting location you decide, you need to be sure the solar power panels will have regular, unbothered access to the sun. Be sure to stay as far away from trees and other objects so no shadows are casted on the panels, because this would greatly reduce the energy produced with the solar panel system.It’s also crucial that you install solar power panels in the right direction. Take a look at the roof to decide the best area or side for sun exposure. You should face the solar panels in the opposite direction from the hemisphere you live in. As an example, if you live in the north hemisphere, face the solar panels towards the south, and vice versa. This will give the solar panels the most direct sunlight. If it’s not possible to face them in the best direction, opt for east or west. No matter the direction, be sure to never install solar panels facing away from the sun.
Setting Up the Mounting Hardware
Whenever putting the solar panels on the roof, it’s ideal to use pre-fabricated mounting hardware. This will ensure the solar panels have been installed properly and will be capable to endure wind, rainfall, and other inclement weather.
You can choose to attach the mounting hardware directly to the roof’s rafters or use wooden blocks which span several rafters to secure the hardware. You want to grant a strong basis for the solar panels in the event of strong winds. Avoid mounting solar panels to the plywood sheathing of the roof, as this will not produce a sufficiently strong foundation and you risk harm to both the solar panels and your roof if you do so.
It is easy to find the rafters from the roof by using a stud finder. You may also consider using a level or chalk line to be sure you are installing the mounting hardware correctly. Be sure to additionally apply sealant around as well as under the mounting hardware to avoid leaks in your roof.
Installing the Solar Panels
With the mounting hardware set up, it’s time to start securing the metal racks and railing. Make sure that water may run and that wind can adequately flow beneath the solar panel once installed. For this to work correctly, the panel must be installed at least 3 inches off the roof.Once you’ve got the hardware, racks and rails in place, you can mount the solar panels. In order to secure the solar panels in place, use restraining hardware. Now is the time to plug your solar panels if you will be installing more than one.
Calculating the Proper Tilt Angle for the Panels
It is vital that you tilt the panels after they are installed for optimum sunlight exposure. Start calculating the best angle by determining the latitude of your house. This can be found on the internet.
After you have found the latitude, add or subtract fifteen degrees to the number, depending on the season. For winter, add 15 degrees so the solar panels are angled more toward the horizon. For summer, reduce the latitude by 15 degrees so they are more vertical. The tilt will help the solar panels get more sunlight with the differences of the seasons. Ideally this article has educated you how to install solar panels for your home. If you’ll still feel intimidated with the process, ask someone for help or begin with just one solar panel. Once you have done it and comprehend it, installing the rest will be very simple.